ECS Metrology, LLC has completed their first ISO/IEC 17025:2005 audit with a scope covering single channel pipettes, multi-channel pipettes, fixed pipette, class 1-4 balances and bench top scales. Along with ISO 17025, ECS will be certified to ISO:9001 standards; a standard that outlines ECS Metrology’s dedication to yearly management and technical reviews.
Our pipette calibration scope, found here, will cover liquid handlers from .5 ul to well over 10000 ul and include both “as-found” and “as-left” data collection. Along with ECS procedures and ISO 8655 guidelines, ECS will calibrate and service pipettes 5 times at 3 volumes. This Level 3 service will be ISO certified by PJLA. Our extensive calibration procedures and intensive technical system has allowed ECS to perform 5 measurements versus the standard 10 measurement system. To provide this pipette service, ECS performed validation testing on 5 readings and compared this EN values with 10 readings. Along with internal validation, ECS Metrology was capable of producing interlaboratory comparison pipette values near the top of the study group. The subsequent analysis showed ECS procedures and pipette calibration services to be validated against independent reference values.
Our balance calibration scope will cover balances with divisions as low as 100,000 d. This 6-place balance calibration service will provide customers with ISO certified calibration certificates, referencing our calibration uncertainty. These uncertainty values are traceable to NIST through the utilization of Class 1 weights and measures. Balances and scales greater than 500 grams will be referenced to NIST Class F weights and measures. Through NIST Class F weights, calculated uncertainties will be greater than that of Class 1 weights. At first, this may seem unsatisfactory. Upon further review, it becomes clear this is not necessary a detriment to the calibration process. NIST Class F weights are used for balances with a high nominal value and lower resolution. Thus, for low resolution, uncertainties of lower class weights do not have an effect of the viability of the calibration.
ISO accreditation is a time consuming, work filled endeavor. ECS has been working and waiting for pipette and balance accreditation for 9 months. The paperwork alone is enough to make an organization want to quit. ECS has persevered and made it through the pipette audit, and now we wait. Expected accreditation date: End of September. Soon we will post our certificate on our website and hang our certificate in our office; but for now, we are back to waiting.